Nanlite PavoTube 30C 4 ft RGBW LED Tube with Internal Battery 4 Light Kit

Item Includes

• 4x Nanlite PavoTube 30C LED Tubes
• 2x Power Adapters
• 2x Power Cables
• 2x Dual Power Cables
• 3x Sync Cables
• 4x Transparent Tube Mounting Clips
• 8x Safety Wires
• 1x Padded Carrying Bag
• 2-Year Limited Warranty (Extend to 3-Year Limited with Registration on NanliteUS.com)

Nanlite PavoTube RGB+W LED Tubes are an amazingly versatile lighting fixture that features 0 to 100% dimming with maximum illumination of 2850 lumens per tube (the 4 tubes in this kit produce 2369Lux @ 1m when combined) at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the color temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this device exceeds most studio lighting needs. It also features a choice of over 360 static light colors on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice.

With six pre-programmed special effects in a simple-to-master menu system, this Nanlite RGB light tube makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, and two different types of continuous flicker/flash. Each of the special effects has many different settings to help you refine it and create precisely the effect you need, as well as an LCD panel showing you exactly what settings you're using, making it easy to fine tune and then recreate them in future.

With easy-to-use dials and buttons set into one end of the light tube, as well as built-in 2.4ghz radio control and master/slave functions, this RGB tube light is versatile enough to slot right into your existing set up without needing a lot of extra preparation. This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects.

Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter, and also has two built-in 2200MaH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall. The light itself has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the finished effect of the lighting.

Both 2-foot and 4-foot variants are available as single lights as well as two light and four light kits.
Download Manual

CRI:

Average 95

TLCI:

Average 95

Warranty:

Limited 2 Year Warranty (Extend to 3 Years Total With Online Registration)

Color Temperature (Kelvin):

2700K-6500K

Lumen Output 3200K:

2700LM

Lumen Output 5600K:

2850LM

Dimming:

0-100%

DMX Control:

No

Compatible Wifi Adapter:

NANLINK WS-TB-1 Transmitter Box

Compatible Remote:

NANLINK WS-RC-C2 Remote Control

Wireless Control Type:

2.4G, WIFI

Frequency:

2.4ghz

Accessory Mount(s):

No

Accessory Port(s):

No

Mount:

T12 and 1/4 20" via adapter

Cooling System:

No

Power Source:

100-240V AC, 15V 4A DC

Max Power Consumption:

30W

Includes Rechargeable Battery:

Yes

Number of Batteries:

2

Battery Chemistry:

Li-Ion

Compatible D-Tap Adapter:

Nanlite CB-DT-DC D-Tap cable with DC Socket

Battery Compatibility:

Built in

Battery Included:

Yes

Charger:

Built in

Battery Required:

Yes

Battery Type:

battery_type_lithium_ion

Charge Time to Full (Hours):

4

Charge Time to 80% (Hours):

3

Runtime @ 100% Brightness (Hours):

2.2

Runtime @ 50% Brightness (Hours):

5.2

Runtime @ 10% Brightness (Hours):

17.2

'Product Diameter (cm):

4.8

'Product Diameter (in):

1.89

Operating Temperature:

0

Electrical Load Capacity:

0

Amp-Hours:

0

Number of Battery Cells:

0

Battery Capacity (Wh):

0

Battery Maximum Output Voltage:

0